TM 10-4320-307-24
2-36
ENGINE SERVICE.
This task covers:
Servicing
INITIAL SETUP
Tools
Manual References
Tool kit, general mechanic's (Item 1, Appendix B)
TM 10-4320-307-10
Materials/Parts
General Safety Instructions
Well ventilated area required during operational
Lubricating oil (Item 22, Appendix C)
check.
Suitable drain pan
Cloth
Equipment
Condition
Reference
Condition Description
Paragraph
Lubrication oil filter service
2-52
performed
SERVICING:
Hot oil can cause serious personnel injury.
1.
Drain oil as follows:
a.
Operate engine until water temperature
reaches 140°F (600C).
b.
Shut engine off.
c.
Remove oil fill cap (1).
NOTE
Drain oil immediately to insure all the oil and
contaminants are removed from the engine.
d.
Place drain pan under oil drain plug (2).
e.
Remove plug (2) from outlet side of drain
valve (3).
f.
Turn drain valve (3) to open position.
g.
Turn drain valve (3) to closed position when all
oil is drained.
h.
Replace plug (2) into outlet side of drain valve
(3).
2-134
