TM 10-4320-307-24
2-35
RADIATOR ASSEMBLY SERVICE/TEST/REPAIR/REPLACE (CONT).
I.
Place core guard (28) in position on radiator assembly (23).
m. Align holes and insert and tighten six screws, lockwashers, and washers (27).
n.
Place shroud frame (26) in position on radiator assembly (23).
o.
Pull overflow hose through clamp on shroud top and secure to radiator cap overflow tube.
p.
Align holes and insert and tighten six screws, lockwashers, washers, and three radiator overflow hose clamps
(25).
Radiator weighs 501 lbs (227 kg). Use suitable lifting device to prevent injury to personnel.
q.
Install radiator assembly (23) on skid assembly (24).
r.
Align holes and insert four mounting screws (20), four nuts (21), and washers (22).
s.
Place fan guard (18) on shroud top (19).
t.
Align holes, insert and tighten eight screws, lockwashers, and washers (17).
2-132
