6-13. WATER PUMP (CONT)
Location/Item
Action
Remarks
CAUTION
Bearing damage may occur if pump is disassembled by pushing on end of pump shaft.
3.
Bearing and
Remove from pump
shaft assem-
body as a unit by
bly, seal as-
pressing on bearing
sembly, and
outer race.
impeller
4.
Bearing and
Remove by pressing shaft
shaft assem-
end out of impeller with
bly (with seal
drift and holder. Seal
assembly)
assembly will remain
attached to bearing and
shaft assembly.
5.
Seal assembly
Remove from bearing and shaft assembly.
Pump mounting gasket
Discard seal assembly.
may have been removed
during removal from
engine. No need to re-
6.
Pump body
Remove and discard gasket.
move plug or connector.
6-121
