TM 5-4320-300-14
6-13. WATER PUMP (CONT)
Location/Item
Action
Remarks
18. Pulley
Place on arbor press bed with sheave end up.
Place a suitable rod between ram of press and
impeller end of shaft. Aline pulley and shaft
matchmarks. Press shaft into pulley until pulley
is in original position.
19. Pump cover
Position new cover gasket on pump body. In-
stall cover over gasket with mounting bolts.
Torque bolts to 6 to 7 ft lb (8 to 9 N.m).
20. Seal assembly
Run pump dry at 1200 rpm for a minimum of
adjustment
30 seconds, or as required, to seat seal assembly.
6-124
