BEARINGS (CONT) - TM-5-4320-300-14

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
494

TM 5-4320-300-14 6-12. BEARINGS (CONT) Location/Item Action Remarks WARNING Make sure that hoists and other lifting equipment are in good repair and of sufficient capacity to safely handle loads without injury to personnel or damage to equipment. Securely attach lifting equipment to crankshaft. Before lifting, be sure load is balanced. 7. Crankshaft Thread a flywheel mounting bolt into crankshaft mounting at flywheel mounting. Using a suitable lifting de- vice equipped with a rope or sling, lift and posi- tion crankshaft in block with bearing journals resting on shells. 8. Bearing shell Measure clearance between main bearing shells and crankshaft and crankshaft journals as follows: journal clearance a. Wipe excess oil from crankshaft journal, and place a soft plastic measuring strip the full width of the bearing shell about 1/4 inch (6.35 mm) off center. 6-117

Privacy Statement
Press Release
Contact