TM 5-4320-300-14
6-11. CRANKSHAFT AND FLYWHEEL (CONT)
Location/Item
Action
Remarks
WARNING
Make sure that hoists and other lifting equipment are in good repair and of sufficient capacity to safely
handle loads without injury to personnel or damage to equipment. Securely attach lifting equipment to
flywheel housing. Before lifting, be sure load is balanced.
53. Flywheel
Support housing with a suitable lifting device
housing
and position it near the engine block.
positioning
54. Timing
Lubricate all gear teeth with MIL-L-2104 oil.
gears
55. Flywheel
Position new gasket on the rear face of end
housing
plate.
gasket
56. Flywheel
Apply MIL-G-10924 grease to shim and install
housing-to-
on end plate.
end plate
shim
6-110
