TM 5-4320-300-14
5-13.
FUEL CONTROL TUBE ASSEMBLY (CONT)
Location/Item
Action
Remarks
2. Fuel control
Remove cotter pin and clevis pin that connect
tube assembly
fuel rod to fuel control tube control lever. Re-
move two attaching bolts and lockwashers at
each bracket. Disengage rack control levers from
control racks and lift the fuel control tube as-
sembly from the cylinder head.
DISASSEMBLY
NOTE
The fuel control tube, one mounting bracket, a spacer, and fuel control tube control lever are
available as a service assembly. When any part of this assembly needs replacing, it is
recommended the complete service assembly be replaced. Therefore, disassembly and assembly
procedures for these items are not included.
3. Fuel control
Remove bracket from the fuel control tube.
tube
4. Rack control
Loosen the adjusting screws or adjusting screw
lever
and lock nut at each rack control lever. Discon-
nect return spring from bracket and front or
rear rack control lever.
5. Return spring
Then remove return spring and rack control
and rack
levers from the fuel control tube.
control lever
5-40
