Organizational Maintenance Troubleshooting - Continued

Organizational Maintenance Troubleshooting - Continued - TM-5-4320-300-14_160

Organizational Maintenance Troubleshooting - Continued - TM-5-4320-300-14_162

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
154

TM 5-4320-300-14 Table 4-2. Organizational Maintenance Troubleshooting - Continued MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION WARNING Severe burns, illness, or death may result if personnel fail to handle diesel fuel properly. Observe the following precautions: · Do not inhale vapor. · Be certain fuel lines and connections are secure. · Do not overfill fuel tank. · Work in a well-ventilated area. Do not direct compressed air against skin. b. Inspect breather tube for blockage and clean with diesel fuel. Dry with compressed air. c. Wash element in diesel fuel and dry with compressed air. If cleaning does not remove clogged or caked material from element, discard it and install a new element in breather assembly. NOTE If gasket was destroyed during removal of the breather assembly from the engine, a new gasket should be installed after the gasket surfaces on the breather and engine have been cleaned. d. Insert bolts and lockwashers in breather, position gasket, and install breather assembly on engine. Tighten bolts securely. Step 5. Check for obstructed muffler exhaust pipe. WARNING Handling hot exhaust shield, exhaust pipe, muffler, and weather cap can cause severe burns. Allow unit to cool before handling. Open weather cap and remove obstruction from exhaust pipe. 4-58

Privacy Statement
Press Release
Contact