Organizational Maintenance Troubleshooting - Continued

Organizational Maintenance Troubleshooting - Continued - TM-5-4320-300-14_156

Organizational Maintenance Troubleshooting - Continued - TM-5-4320-300-14_158

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
150

TM 5-4320-300-14 Table 4-2. Organizational Maintenance Troubleshooting - Continued MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION If oil is to be reused, remove oil filler cap and pour approximately 50%, or less, of the collected oil into the oil filler. Wait several minutes and check oil level. Pour enough of the remaining oil into the oil filler to bring the crankcase oil level to F on the dipstick. CAUTION Do not overfill. Oil may be blown out through the crankcase breather if crankcase is overfilled. If crankcase is to be refilled with fresh oil, discard old oil. Remove and discard filter cartridge. Inspect filter adaptor on the engine for nicks, burrs, or other damage. Before installing new filter cartridge, coat filter gasket with oil and wipe off filter adaptor before screwing the filter cartridge on hand tight. Run engine for a few minutes and check for filter leaks. Retighten if necessary. Fill crankcase through oil filter with oil to F on dipstick. 4-54

Privacy Statement
Press Release
Contact