TM 5-4320-300-14Table 4-2. Organizational Maintenance Troubleshooting - ContinuedMALFUNCTIONTEST OR INSPECTIONCORRECTIVE ACTIONWARNINGCompressed air used for cleaning shall notexceed 100 psi (690 kPa). Use goggles orface shield for eye protection. Do not directairstream against skin.b. If a regulated compressed air supply is available, direct a streamof compressed air (100 psi (690 kPa) maximum) through theelement from the inside.c. Reinstall the clean filter element and the baffle and cup assembly. Reinstall and securelytighten the clamp assembly wing nut.d. Reset the restriction indicator by pushing down the button on top of indicator, then start theengine. If the restriction indicator again shows red, replace the filter element. Step 3. Checkfor high coolant temperature, above 192°F (89°C). If coolant temperature remains highduring running, check the following.4-50
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business