TM 5-4320-300-14
Table 4-2. Organizational Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
c. If oil line or filter continues to leak after tightening, replace oil line and fittings as described in
paragraph 4-35, or replace the oil filter. Unscrew oil filter cartridge counterclockwise; remove
and discard. Coat the filter gasket with clean lubricating oil and wipe off the filter adaptor
before screwing on the replacement cartridge. Tighten hand tight.
Step 4. Check for blocked breather element.
CAUTION
Remove breather pipe assembly from engine slowly and
a.
Remove breather assembly bolts and
lockwashers,
then
remove
breather
from engine. Remove element from
breather.
4-57
