Table III. Engine Repair and Replacement Standards-Continued
Section II. REMOVAL OF MAJOR ITEMS
Slide the coupling halves back onto
100. Coupling
the shafts.
(fig. 43)
a. Removal
(2) Loosen retaining ring (1) and one of
Remove pump (para 101) or assembled engine
the hubs (3) from its shaft and
(para 102) and remove coupling as follows:
remove the key. Slide the coupling
half (5) with its assembled seal (2)
(1) Remove the eight bolts (4) and nuts
and retaining ring (1) from the shaft.
(6) that join the coupling halves (5)
together.
TAGO 6358-A
55