TM 5-3825-270-23&P
0171
INSTALLATION - Continued
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
NOTE
Perform Steps (7) and (8) if fitting was removed.
7.
Coat threads of fitting (Figure 7, Item 7) with pipe thread sealant.
9
10
1
6
7
8
9
Figure 7. Air Hose Installation.
8.
Install fitting (Figure 7, Item 7) on air actuator (Figure 7, Item 6).
9.
Install hose (Figure 7, Item 9) on fitting (Figure 7, Item 7) with clamp (Figure 7, Item 8).
10.
Install hose (Figure 7, Item 9) on solenoid valve (Figure 7, Item 1) with clamp (Figure 7, Item 10).
11.
Install hose (Figure 8, Item 4) on solenoid valve (Figure 8, Item 1) with clamp (Figure 8, Item 5).