TM 5-3825-270-23&P
0171
REMOVAL - Continued
7.
Loosen clamp (Figure 3, Item 14) and remove hose (Figure 3, Item 13) from solenoid valve (Figure 3, Item
11).
8.
Loosen clamp (Figure 4, Item 15) and remove hose (Figure 4, Item 16) from solenoid valve (Figure 4, Item
11).
16
15
11
16
17
18
19
Figure 4. Air Hose Removal.
9.
Loosen clamp (Figure 4, Item 17) and remove hose (Figure 4, Item 16) from fitting (Figure 4, Item 18).
NOTE
Perform Step (10) if fitting is damaged.
10.
Remove fitting (Figure 4, Item 18) from air actuator (Figure 4, Item 19).
END OF TASK
INSTALLATION
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
NOTE
Perform Steps (1) and (2) if fitting was removed.
1.
Coat threads of fitting (Figure 5, Item 18) with pipe thread sealant.