TM 5-3825-270-23&P
FIELD MAINTENANCE
ENGINE INLET ASSEMBLY MANIFOLD REPLACEMENT
INITIAL SETUP:
Equipment Condition (cont.)
Tools and Special Tools
Engine nozzle tubes removed. (WP 0118)
Tool Kit, General Mechanic's: Automotive
Air hose intake removed. (WP 0109)
(WP 0225, Table 1, Item 12)
Cylinder head removed. (WP 0145)
Materials/Parts
Gasket (WP 0226, Table 1, Item 19) Qty: 1
References
Parts Manual (WP 0220) Figure 4039
Equipment Condition
Fuel/water separator and filter head removed.
REMOVAL
1.
Remove two nuts (Figure 1, Item 4), screws (Figure 1, Item 2), and bracket (Figure 1, Item 3) from engine block
(Figure 1, Item 1) and injection pump assembly (Figure 1, Item 5).
1
2
3
4
5
Figure 1. Inlet Assembly Manifold Removal.
2.
Loosen clamp (Figure 2, Item 7) and remove vent hose (Figure 2, Item 6) from inlet assembly manifold (Figure
2, Item 8).