TM 5-3825-270-23&P
0098
REMOVAL - Continued
CAUTION
Control panel and cover must be supported after removal. Allowing cover to hang from wiring
may result in damage to equipment.
14.
Remove six screws (Figure 10, Item 43), washers (Figure 10, Item 44), and control panel (Figure 10, Item 45)
from main control box (Figure 10, Item 46).
43, 44
45
46
Figure 10. Engine Wire Harness Removal.
NOTE
Note routing of harness prior to removal to ensure proper installation.
Tag and mark wires prior to removal to ensure proper installation.
Remove cable ties and cushion clips as required.
All wires are removed from terminal strips the same way.
15.
Remove black wire from interconnect terminal strip (Figure 11, Item 49) socket 1.
