TM 5-3825-270-23&P
0098
INSTALLATION - Continued
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
16.
Apply sealant to the threads of six screws (Figure 13, Item 43).
43, 44
45
46
Figure 13. Engine Wire Harness Installation.
17.
Install six washers (Figure 13, Item 44) and screws (Figure 13, Item 43) on main control box (Figure 13, Item
45) and control panel (Figure 13, Item 46). Tighten six screws securely.
18.
Close and secure control panel cover (Figure 14, Item 42) with T-handle (Figure 14, Item 41).
41
42
Figure 14. Engine Wire Harness Installation.
19.
Install blue wire eyelet (Figure 15, Item 37) on starter relay (Figure 15, Item 34) with lockwasher (Figure 15,
Item 36) and nut (Figure 15, Item 35).
