TM 5-3825-270-23&P
0011
ENGINE START/ENGINE STOP SWITCH
Figure 6. Engine Start/Engine Stop Switch - Step 4.
NOTE
Fuel supply at fuel injection pump is normally pressurized.
6.
Visually observe fuel stream to verify if fuel supply is pressurized.
7.
Release ENGINE START/ENGINE STOP switch.
CONDITION/INDICATION
Is fuel pressurized at fuel supply hose on engine injection pump banjo-fitting?
DECISION
No - Go to step 5. (Step 5 - Is fuel pressurized at fuel supply hose on water separator?)
Yes - Replace engine injection pump. (WP 0117) Verify problem is solved. (Step 6 - Does engine run
normally?)
STEP 5
Is fuel pressurized at fuel supply hose on water separator?
1.
Reconnect fuel supply hose to engine injection pump banjo-fitting.