TM 5-3825-270-23&P
0010
ENGINE INJECTION
PUMP
BANJO-FITTING
Figure 5. Engine Injection Pump Banjo-Fitting - Step 5.
3.
Hold and direct fuel supply hose into container suitable to hold fuel.
4.
With the aid of an assistant, move ENGINE START/ENGINE STOP switch to ENGINE START position and
hold.
ENGINE START/ENGINE STOP SWITCH
Figure 6. Engine Start/Engine Stop Switch - Step 5.
NOTE
Fuel supply at fuel injection pump is normally pressurized.
5.
Visually observe fuel stream to verify if fuel supply is pressurized.
6.
Release ENGINE START/ENGINE STOP switch.
CONDITION/INDICATION
Is fuel pressurized at fuel supply hose on engine injection pump?