TM 5-3825-270-23&P
0008
ENGINE INJECTION
PUMP
BANJO-FITTING
Figure 5. Engine Injection Pump Banjo Fitting - Step 7.
3.
Hold and direct fuel supply hose into container suitable to hold fuel.
4.
Rotate EMERGENCY STOP switch to on position. (TM 5-3825-270-10)
5.
With the aid of an assistant, move ENGINE START/ENGINE STOP switch to ENGINE START position and
hold.
ENGINE START/ENGINE STOP SWITCH
Figure 6. Engine Start/Engine Stop Switch - Step 7.
NOTE
Fuel supply pressure at fuel injection pump is approximately 8 to 12 psi (55 to 83 kPa).
6.
Visually observe fuel stream to verify if fuel supply is pressurized.
7.
Release ENGINE START/ENGINE STOP switch.
CONDITION/INDICATION
Is fuel pressurized at fuel supply hose on engine injection pump banjo-fitting?
