• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ENGINE STALLS
Figure 3. Water Pump Outlet Gauge - Step 3.

Field Maintenance Manual Tools List For Engineer Mission Module - Water Distributor Page Navigation
  54    55    56    57    58  59  60    61    62    63    64  
img
.
TM 5-3825-270-23&P
0009
FUEL TANK
Figure 1. Fuel Tank - Step 1.
CONDITION/INDICATION
Does water distributor have sufficient fuel?
DECISION
No - Fill with sufficient fuel to start engine. (TM 5-3825-270-10) Verify problem is solved. (Step 9 - Does engine
run normally?)
Yes - Go to step 2. (Step 2 - Does engine oil pressure reach and/or maintain 8 psi (55 kPa) or greater at engine
start up?)
STEP 2
Does engine oil pressure reach and/or maintain 8 psi (55 kPa) or greater at engine start up?
NOTE
Water distributor is equipped with engine protection functions. If engine oil pressure is 7 psi
(48 KPa) or less at idle speed or falls below 20 psi (140 kPa) at rated speed, the electronic
governor controller will command engine to shut down.
1.
Observe OIL PRESSURE gauge while starting engine.
ENGINE OIL PRESSURE GAUGE
Figure 2. Engine Oil Pressure Gauge - Step 2.
0009-2


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.