TM 5-3825-270-23&P
0009
when engine is hot. Fuel can be ignited when engine is hot. When working with fuel, post
signs that read NO SMOKING WITHIN 50 FEET OF VEHICLE. Failure to comply may
result in injury or death to personnel.
1.
Shutdown engine. (TM 5-3825-270-10)
2.
Place container suitable for holding fuel beneath engine.
3.
Disconnect fuel supply hose from engine injection pump banjo-fitting.
ENGINE INJECTION
PUMP
BANJO-FITTING
Figure 7. Engine Injection Pump Banjo-Fitting - Step 7.
4.
Hold and direct fuel supply hose into container suitable to hold fuel.
5.
With the aid of an assistant, move ENGINE START/STOP switch to ENGINE START position and hold.
ENGINE START/ENGINE STOP SWITCH
Figure 8. Engine Start/Stop Switch - Step 7.
NOTE
Fuel supply at fuel injection pump is normally pressurized.
6.
Visually observe fuel stream to verify if fuel supply is pressurized.
7.
Release ENGINE START/STOP switch.
