TM 5-3825-270-10
0021
LOAD TANK AT STRAINER WITH EXTERNAL PUMP - Continued
1
4
3
2
Figure 3. Load Tank At Strainer With External Pump.
10.
Install caps (Figure 3, Item 2) on suction hoses (Figure 3, Item 4).
11.
Install cap (Figure 3, Item 3) on connection point C1 (Figure 3, Item 1).
12.
Disconnect suction hose (Figure 3, Item 4) from suitable pump.
13.
Stow hoses (WP 0078).
END OF TASK
LOAD TANK AT STRAINER WITH HYDRANT
NOTE
Ensure that all valves and petcocks are in the closed position prior to performing this task.
1.
Unstow hoses (WP 0078).
2.
Ensure that water pump is primed (WP 0019).
3.
Remove cap (Figure 4, Item 3) from connection point C1 (Figure 4, Item 1).
