TM 5-3825-270-10
0021
LOAD TANK AT STRAINER WITH HYDRANT - Continued
CAUTION
Hydrant valve must not be opened beyond pressure capability on water distributor connection
C1. Do not exceed 50 psi. Failure to comply may result in damage to equipment.
14.
Using fire hydrant wrench, open valve screw (Figure 10, Item 13) on fire hydrant (Figure 10, Item 9) slowly to
allow water to flow while watching inlet pressure gauge (Figure 10, Item 14) at control panel.
14
9
13
FIRE HYDRANT WRENCH
Figure 10. Load Tank At Strainer With Hydrant.
15.
Close valve V1 (Figure 11, Item 12).