TM 5-3825-270-10
OPERATOR MAINTENANCE
STOW/UNSTOW HOSES
INITIAL SETUP:
Not Applicable
UNSTOW FILL HOSES
NOTE
Both fill hoses are removed the same way. Top hose shown.
1.
Remove four holding pins (Figure 1, Item 1) from retaining pins (Figure 1, Item 2).
1
2
3
4
Figure 1. Unstow Fill Hoses.
2.
Remove four retaining pins (Figure 1, Item 2) from hose mounting brackets (Figure 1, Item 3).
3.
Remove two hoses (Figure 1, Item 4) from hose mounting brackets (Figure 1, Item 3).
END OF TASK
STOW FILL HOSES
NOTE
Both fill hoses are stowed the same way. Top hose shown.
1.
Place two hoses (Figure 2, Item 4) in hose mounting brackets (Figure 2, Item 3).