TM 5-3820-276-10-2
0200
Table 6.
PMCS - MCS - After Drilling Equipment Operation - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
1
WWDS00726
Figure 43. Hydraulic Oil Level.
WARNING
6
After
Engine Oil Level
Do not allow hot oil or components to touch
your skin. Hot oil or components will burn
your skin. Wear heat-resistant gloves,
goggles, and protective clothing when you
work near hot oil or components. If hot oil
gets on your skin, seek medical aid
immediately. Failure to comply may result in
injury or death to personnel. Seek medical
attention in the event of an injury.
1. Remove right-side engine cover panel.
2. Check engine oil level on dipstick (Figure 44, Item
Engine oil level above
1). Add engine oil as required (WP 0226).
FULL mark. Notify
maintenance.
02/13/2013root(pmcswp)wpno(I40001)
