TM 5-3820-276-10-2
0200
Table 6.
PMCS - MCS - After Drilling Equipment Operation.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
WARNING
1
After
Engine Coolant
Do not remove filler cap from a HOT engine
radiator. Sudden release of hot engine
coolant and steam can cause serious burns
and a loss of coolant. Make sure engine is
cool and engine cooling system is fully
depressurized before removing radiator filler
cap. Failure to comply may result in injury or
death to personnel. Seek medical attention
in the event of an injury.
Check engine coolant level in radiator overflow tank
(Figure 39, Item 1). Add engine coolant as required
1
WWDS00718
Figure 39. Engine Coolant.
2
After
Hydraulic
1. Check hydraulic pump (Figure 40, Item 1), and
Hydraulic pump or hoses
Control Manifold, hoses for leaks or missing hardware.
leaking, or missing
Pump, Levers,
hardware. Notify
Hoses, and
maintenance.
Gauges
02/13/2013root(pmcswp)wpno(I40001)
