TM 5-3820-276-10-2
0200
Table 4.
PMCS - MCS - Before Drilling Equipment Operation - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
WARNING
17
Before
Engine Oil Level
Do not allow hot oil or components to touch
your skin. Hot oil or components will burn
your skin. Wear heat-resistant gloves,
goggles, and protective clothing when you
work near hot oil or components. If hot oil
gets on your skin, seek medical aid
immediately. Failure to comply may result in
injury or death to personnel. Seek medical
attention in the event of an injury.
1. Remove right-side engine cover panel.
2. Check engine oil level on dipstick (Figure 29, Item
Engine oil level above
1). Add engine oil as required (WP 0226).
FULL mark. Notify
maintenance.
1
WWDS00728
Figure 29. Engine Oil Level.
18
Before
Engine Wiring,
1. Check engine wiring (Figure 30, Item 1) for broken
Wire connections loose,
Connections,
wires, loose connections, and missing insulation.
missing insulation, or
and Fuel Lines
wires broken. Notify
maintenance.
02/13/2013root(pmcswp)wpno(I40001)
