TM 5-3820-276-10-2
0180
ENGINE CRANKS BUT DOES NOT START - PAC - Continued
CORRECTIVE ACTION - Continued
2.
Position master power control switch to ON/START position. DO NOT START ENGINE
(Figure 12).
STOP
POSITION
MAIN
POWER
CONTROL
ON/START
SWITCH
POSITION
ENGINE
START
WWDS00200
Figure 12. Master Power Control Switch.
3.
Check if battery VOLTS gauge reads 22 to 28 volts (Figure 13).
BATTERY
VOLTS
GAUGE
WWDS00213
Figure 13. Battery VOLTS Gauge.
a.
If battery VOLTS gauge does not read 22 to 28 volts, attempt to slave start PAC using
another vehicle (Volume 1, WP 0064). If problem persists, notify maintenance.
b.
If battery VOLTS gauge reads 22 to 28 volts, notify maintenance.
END OF WORK PACKAGE