TM 5-3820-276-10-2
0171
ENGINE FAULT ALARM RETRIEVAL - MCS - Continued
CORRECTIVE ACTION - Continued
2.
Using electronic display, press button four until fault alarms are displayed (Figure 2).
BUTTON FOUR
WWDS00741
Figure 2.
Button Four.
3.
Note any active fault alarms displayed on diagnostic display.
4.
Place ignition switch to OFF position (Figure 1).
a.
If one or more engine fault alarms are present, notify maintenance.
b.
If no engine fault alarms are present, NO ACTIVE FAULTS will be displayed on electronic
display.
END OF WORK PACKAGE