TM 5-3820-276-10-1
0060
POST OPERATION CONFIGURATION OF PAC - Continued
WARNING
Do not disconnect the air supply line from compressor until air pressure is released. Air
supply line can remain under pressure even after compressor stops. Failure to comply may
result in injury or death to personnel. Seek medical attention in the event of an injury.
2.
Pull safety cable wedge (Figure 2, Item 4) down to open loop in safety cable (Figure 2, Item 3).
1
2
4
3
WWDS00417
Figure 2.
Hose Removal from Service Valve.
3.
Slide safety cable (Figure 2, Item 3) from air service valve (Figure 2, Item 1) and down onto hose
(Figure 2, Item 2).
4.
With aid of an assistant, remove 2-1/2-in. (64 mm) hose (Figure 2, Item 2) from air service valve
(Figure 2, Item 1).
5.
Pull safety cable wedge (Figure 3, Item 2) down to open loop in safety cable (Figure 3, Item 3).