TM 5-3820-276-10-1
0030
ROD HANDLING ARM SUPPORT BRACKET REMOVAL - Continued
17.
With aid of an assistant, push main winch control (Figure 6, Item 3) forward to raise jib cable and hook
(Figure 6, Item 4) and rod handling arm support bracket (Figure 6, Item 6).
1
2
3
4
5
6
WWDS00823
Figure 6.
Jib Controls.
18.
With aid of an assistant, push JIB ROTATE/RAISE/LOWER lever (Figure 6, Item 1) to left to turn jib
(Figure 6, Item 2) away from drilling rig.
19.
With aid of an assistant, pull main winch control (Figure 6, Item 3) back and lower jib cable and hook
(Figure 6, Item 4) and rod handling arm support bracket (Figure 6, Item 6) to ground.
20.
With aid of an assistant, remove nylon strap (Figure 6, Item 5) from jib cable hook (Figure 6, Item 4) and rod
handling arm support bracket (Figure 6, Item 6).
21.
Position jib cable hook (Figure 6, Item 4) in safe location.
END OF TASK