TM 5-3820-276-10-1
0012
WWDR/WWSV STARTING PROCEDURES - Continued
3
1
2
7
6
5
4
WWDS00146
Figure 2.
Starting Vehicle.
10.
Check brake system air pressure gauge (Figure 2, Item 3). Air pressure must be 60 to 130 psi
(414 to 896 kPa). Brake system failure (low air) alarm will sound until air pressure reaches 60 to 75 psi (414
to 517 kPa).
NOTE
Fuel tank level switch is located in WWSV only.
11.
Set FUEL TANK LEVEL switch (Figure 2, Item 6) to R.H. TANK.
12.
Check fuel gauge (Figure 2, Item 5). Make sure it shows enough fuel to complete mission.
NOTE
Coolant temperature gauge may not show reading at engine idle.
Normal coolant temperature range during operations is 180F to 200F (82C to
93C).
13.
Check engine coolant temperature gauge (Figure 2, Item 4). Coolant temperature must be less than 219F
(104C).
14.
Check battery voltmeter gauge (Figure 2, Item 2). Voltage should be between 24 and 28 volts.
