TM 10-4930-204-13
Legend for figure 4-31:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Bolt
Washer
Bracket
Cotter pin
Nut
Washer
Capscrew
Lifting eye
Nut
10.
11.
12.
13.
14.
15.
16.
17.
Washer
Drag loop
Hinge assy
Filler plug
Gasket
Tiedown assy
Discharge valve
Cam lever
(2) Inspection.
(a) Inspect parts for cracks, breaks, rust, corrosion,
or other damage.
(b) Replace any defective parts.
(3) Installation.
(a) Attach lifting eye (8, fig. 4-31); to bracket (3)
and secure with capscrew (7), washer (6),
nut (5), and cotter pin (4),
(b) Connect bracket (3) to tank and secure with
washers (2) and bolts (1).
b.
Drag Loops .
(1) Removal.
Remove nuts (9, fig.
4-31), washers (10), and
pull drag loop (11) from tank.
(2) Inspection.
(a) Inspect parts for cracks, breaks, rust,
corrosion ,
or other damage.
(b) Replace any defective part.
(3) Installation.
Install drag loop (11, fig. 4-31),
washers (10),
and nuts (9) on tank.
c.
Filler Plug Gasket.
(1) Removal.
(a) Release hinge assembly (12, fig. 4-31) and open
filler plug (13).
(b) Remove gasket (14) from opening under filler plug.
(2) Inspection.
(a) Inspect gasket for cracks, breaks,, abrasion and
deterioration.
4-61
