TM 10-4630-207-13&P
UNIT MAINTENANCE
WASTE WATER VACUUM TANK TRAILER
NSN 4630-01-513-8155
CHOPPER TUBE/WAND
REPLACE
INITIAL SETUP:
Tools
Personnel Required
Tool Kit, General Mechanic's, Automotive (WP
MOS 77W, Water Treatment Specialist
Materials/Parts
Equipment Condition
Gloves, Rubber (WP 0089 00, Table 2, Item 4)
Copper tube/wand disconnected, steam cleaned
Pipe Sealant (WP 0091 00, Item 27)
Rags, Wiping (WP 0091 00, Item 28)
Respirator (WP 0089 00, Table 2, Item 8)
WARNING
Protective clothing and equipment must be worn. A heavy-duty rubber apron,
rubber gloves, respirator, safety splash goggles and/or face shield are
required when potential exists for contact with wastewater or contaminated
surfaces. Wastewater and surfaces may be contaminated with pathogenic
microorganisms, bacteria or viruses, which present a risk of serious illness or
death to personnel. Refer to cleaning and sanitizing procedures in WP 0018
REPLACE
To replace the chopper tube/wand or ball valve, proceed as follows:
1. Ensure the chopper tube/wand has been cleaned and sanitized if it must be disassembled to remove
the ball valve (figure 1, item 1).
1
Figure 1. Chopper Tube/Wand
0047 00-1
