TM 10-4630-207-13&P
0046 00
d. Wrap another loop of banding (figure 2, item 3) around hose and through buckle (figure 2, item
4).
e. Position banding (figure 2, item 3) in slots of banding tool (figure 2, item 5).
4
3
1
2
7
5
Figure 2. Fastening Banding Strap
WARNING
Do not over-tighten banding when turning handle. Banding may snap, causing
severe injury.
f.
Apply pressure to gripper lever (figure 3, item 1) and turn handle (figure 3, item 2) until banding
(figure 3, item 3) is snug. The banding tool will lock in place when tension is applied. Reposition
tool as required.
g. Continue turning handle (figure 3, item 2) until banding stops moving through buckle (figure 3,
item 4).
h. While reversing handle -in turn, roll banding tool to opposite side of buckle (figure 3, item 4).
This will bend banding (figure 3, item 3) and prevent it from slipping through buckle (figure 3,
item 4) when the banding tool is removed.
0046 00-3
