TM 10-4630-207-13&P
0037 00
6. Remove cotter pin (figure 8, item 3) and retaining pin (figure 8, item 4) on cable bracket (figure 8,
item 5).
7. Slide cable clamp (figure 8, item 5) off of spreader bar (figure 8, item 6).
8. Unscrew parking brake cable (figure 8, item 7) from cable bracket (figure 8, item 5).
9. Remove parking brake cable.
10. Feed new cable through cable clamp (figure 8, item 1).
11. Screw new cable into cable bracket (figure 8, item 5).
12. Slide cable clamp (figure 8, item 5) on to spreader bar (figure 8, item 6).
13. Install retaining pin (figure 8, item 4). Secure with cotter pin (figure 8, item 3).
14. Place new cable into clamp (figure 8, item 1) and tighten nuts (figure 8, item 2).
3
5
4
7
1
6
2
Figure 8. Installing Main Brake Cable
15. Install parking brake cable (figure 9, item 1) into brake handle assembly (figure 9, item 2).
16. Secure cable with retaining pin (figure 9, item 3) washer, and cotter pin (figure 9, item 4).
0037 00-6
