TM 10-4630-207-13&P
OPERATOR MAINTENANCE
WASTE WATER EVACUATION TANK TRAILER
NSN 4630-01-513-8155
RIMS/TIRES
SERVICE, REPLACE
INITIAL SETUP:
Tools
Personnel Required
Bottle Jack (WP 0053 00, Table 2, Item 2)
MOS 63B Light Vehicle Mechanic
Lug Wrench (WP 0053 00, Table 2, Item 6)
Tool Kit, General Mechanic's, Automotive (WP
Tire Gage (WP 0053 00, Table 2, Item 13)
Materials/Parts
Equipment Condition
Gloves, Work (WP 0089 00, Table 2, Item 5)
Trailer unhitched
Rags, Wiping (WP 0091 00, Item 28)
Hand brakes applied
Chocks in place
SERVICE
1. Using a tire gage, check tire pressure and adjust/inflate tires to 110-lbs pressure.
2. Replace a tire that won't hold pressure or a bent rim.
REPLACE
To replace a tire or rim, proceed as follows:
1. If the spare rim and tire (figure 1, item 1) are to be used, unlock the wire lock (figure 1, item 2) (key
located on ignition key ring) securing the spare tire and lug wrench(figure 1, item 3) to the bracket
(figure 1, item 4).
2. Loosen friction screw (figure 1, item 5) to release and remove the lug wrench (figure 1, item 3)
3. Remove two hex nuts (figure 1, item 6) from the studs (figure 1, item 7) securing the rim and tire
(figure 1, item 1) to the bracket (figure 1, item 4).
WARNING
The spare rim and tire is heavy. To prevent injuries, two people are required
to remove it and replace it from and onto the trailer.
4. Remove the spare rim and tire (figure 1, item 1) from the bracket (figure 1, item 4).
0038 00-1
