TM 10-4630-207-13&P
0029 00
WARNING
The vacuum pump inside mounting bolts are located in a restricted space.
Exercise caution and wear gloves when loosening and tightening these bolts
to avoid injuries due to pinching.
4. Loosen but do not remove the 1-inch vacuum pump inside mounting bolts (figure 8, item 1).
5. Loosen but do not remove the 1-inch vacuum pump outside mounting bolts (figure 8, item 2).
2
1
Figure 8. Removing Vacuum Pump Mounting Bolts
6. Loosen the belt adjuster mechanism (figure 9, item 1) locknut (figure 9, item 2).
7. Turn adjusting nut (figure 9, item 3) to the left to loosen the drive belt.
2
1
3
Figure 9. Belt Adjuster
0029 00-6
