TM 10-4630-207-13&P
0029 00
2. Remove hex bolts and washers (figure 7, item 1) from the drive belt guard brackets. Two are located
at each end of the guard (figure 7, item 1), and one at the rear center (figure 7, item 2).
WARNING
The drive belt guard is heavy. To avoid injury, two soldiers are required to
remove and install the guard from and onto the trailer.
3. Remove drive belt guard (figure 7, item 3).
1
2
3
Figure 7. Removing Drive Belt Guard
0029 00-5
