TM 10-4630-207-13&P
0029 00
WARNING
The drive belt guard is heavy. To avoid injury, two soldiers are required to
remove and install the guard from and onto the trailer.
19. Position pulley guard (figure 14, item 1) over pulleys and belt for installation.
20. Install hex bolts and washers (figure 14, item 2) into the pulley guard brackets. Two are located at
each end and one at the rear center (figure 14, item 3).
3
2
1
Figure 14. Installing Drive Belt Guard
21. Position the throttle mounting plate (figure 15, item 1) with throttle attached (figure 15, item 2) onto
the control post. Install two hex bolts (figure 15, item 3), nuts, flat and lock washers (figure 15, item
4) to secure throttle to post.
3
2
2
4
1
Figure 15. Installing Throttle Bracket
END OF WORK PACKAGE
0029 00-9/(10 Blank)
