TM 10-4320-344-24
3.8.21 Crankshaft Pulley and Vibration Damper Replacement, Model 609-A.
This task covers:
3.8.21.1 Removal
3 .
8 .2 1 . 2 I n s t a l l a t i on
INITIAL SETUP
Tools
General Mechanic’s Automotive
Tool Kit, Appendix B, Section III,
Item 1
Torque Wrench, Appendix B, Section
III, Item 2,
Material/Parts
Lock Washer (TM 10-4320-344-24P)
Equipment Conditions
Radiator removed, paragraph 2.20.4.
Equipment Conditions (Continued)
Alternator belt removed,
paragraph 2.21.13.
General Safety Instructions
Do not work on equipment that is not
securely stabilized to prevent rolling
o r s l i d i n g .
Do not work on equipment without follow-
ing standard shop safety practices.
3.8.21.1 Removal.
Figure 3-43.
Vibration Damper and Crankshaft Pulley Replacement, Model 609-A.
a .
Remove six screws (Figure 3-43, 1) and vibration damper (2) from crankshaft
p u l l e y ( 3 ).
b .
Remove pulley mounting nut (4), lock washer (5), tapered bushing (6), and
key (7).
Discard lock washer (5).
c .
Remove crankshaft pulley (3) and pulley cone washer (8) from crankshaft.
3.8.22.2 Installation.
a.
I n s t a l l
b.
I n s t a ll
3-92
pulley cone washer (8) and crankshaft pulley (3) on crankshaft.
tapered bushing (6) and key (7) in crankshaft pulley (3).
