TM 10-4320-344-24
j .
Install new washer (9) with wide end facing toward upper shoulder on pushrod
cover tube (10).
k.
Insert spring end of pushrod cover tube assembly (8) in crankcase hole (17)
and position upper end of pushrod cover tube (10) with cone in cylinder head
assembly (4).
l .
Slowly remove spring tensioning tool while guiding upper end of pushrod cover
tube assembly (8) into cylinder head assembly (4).
m.
Repeat steps h through m for the other pushrod cover tube assembly (8).
p.
Remove tags and install pushrods (1).
q.
Refer to paragraph 2.21.50 and perform cold rocker arm adjustment.
3-97