TM 10-4320-344-24
3.8.19 Cylinder Head Assembly Replacement, Model 609-A. (Continued)
Figure 3-40.
Cylinder Head Assembly Removal, Model 609-A.
3.8.19.2 Installation.
solvent without proper ventilation and clothing.
Do not
Do not use cleaning
smoke or use near open flame or excessive heat.
Dry cleaning solvet is
potentially dangerous to personnel and property.
Clean parts in a well-
ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber
gloves to protect eyes and skin.
Wash exposed skin thoroughly.
Failure to
obey this warning may result in personal injury or death.
a.
Clean cylinder head mounting surface of engine block thoroughly with cleaning
solvent,
wire brush, and scraper.
To prevent the possibility of embedding foreign objects in the eyes, safety
glasses must be worn when using compressed air.
b .
Using compressed air, dry cylinder head engine block.
c .
Install cylinder head gasket (8) with the bead down using gasket adhesive.
d .
Install cylinder head assembly (7) on engine block.
e .
Install eighteen new lock washers (6) and nuts (5).
Hand-tighten nuts (5).
3-92
