TM 10-4320-344-24
3.10 WHEEL MOUNTED FRAME ASSEMBLY.
3.10.1 Wheel Mounted Frame Assembly Maintenance.
This task covers:
3.10.1.1
Removal
3 .
10 . 1 . 3 I n s t a l l a t i on
3 .
10 . 1 . 2 I n s p e c t i on
INITIAL SETUP
Tools
General Mechanic’s Automotive
Tool Kit, Appendix B, Section
III, Item 1
Material/Parts
Pan, Appendix C, Item 19
Rags, Appendix C, Item 20
Equipment Conditions
Pumping station shut down, TM 10-4320-
344-10.
Sound Enclosure removed, paragraph 2.12
(609-C).
Air Cleaner Assembly removed, paragraph
2.14.2 (609-C) or 2.14.3 (US636HCCD-1).
Battery Box removed, paragraph 2.15.2
(609-A), 2.15.3 (609-C), or 2.15.4
(US636HCCD-1).
Battery Cable Assemblies removed, para-
graph 2.15.5 (609-A and US636HCCD-1).
Battery Cable and Power Cable Assemblies
removed, paragraph 2.15.6 (609-C).
Start Alarm Relay and Start Pilot Relay
removed, paragraph 2.15.10 (609-A and
609-C) .
Equipment Conditions
(Continued)
Starter Rectifier removed, paragraph
2.21.17 (609-C).
Fuel Tank removed, paragraph 2.22.2.
Pump Assembly removed, paragraph 3.6.1.
Pump Supports removed, paragraph 3.6.5
(US636HCCD-1).
Pump Mount Isolators removed, paragraph
3.6.6 (609-C).
Engine removed, paragraph 3.8.1.
Front Engine Support removed, paragraph
3.8.2 (609-A).
Engine Mount Isolators removed, paragraph
3.8.4 (609-C).
General Safety Instructions
Do not work on equipment that is not
securely stabilized to prevent rolling
o r s l i d i n g.
Diesel fuel is flammable.
Keep sparks,
cigarettes, and open flame away from fuel
tank.
Do not work on equipment without follow-
ing standard shop safety practices.
3.10.1.1 Removal.
Placing the wheel mounted frame assembly in the equipment
conditions specified above, for the applicable model, will remove the wheel mounted
frame assembly.
3.10.1.2 Inspection.
Inspect wheel mounted frame assembly for cracked or broken welds
and seams, corrosion, bends or distortions, damaged tie down points, or damage.
3.10.1.3 Installation.
Refer to the paragraphs identified in the equipment conditions
specified above, for the applicable model, and install the removed components to
place the wheel mounted frame assembly in service.
3-103
