Figure 3-2. S-Bolt Removal From Flywheel.

TM-10-4320-344-24 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
446

e . f . g . h . i . TM 10-4320-344-24 Set pump assembly (5) down and block so that it will be secure and remove lifting device and sling. Remove shims (12), if present. Press pilot bushing (13) from engine flywheel (11). Step h applies to Model 609-A only. Remove eight bolts (14), lock washers (15), and drive coupling (16) from engine flywheel (11). Discard lock washers (15). Figure 3-2. S-Bolt Removal From Flywheel. Step i applies to Models 609-C and US636HCCD-1 only. Remove four S-bolts (Figure 3-2, 1) from engine flywheel (2). 3.6.1.2 Installation. a . b . c . Step a applies to Models 609-C and US636HCCD-1 only. Install four S-bolts (1) in engine flywheel (2). Step b applies to Position drive coupling (Figure 3-1, with eight new lock washers (15) and Lubricate bore of pilot bushing (13) install pilot bushing (13). Model 609-A only. 16) on engine flywheel (11) and secure b o l t s ( 1 4 ). with antisieze sealing compound and 3-11

Privacy Statement
Press Release
Contact