TM 10-4320-344-24
SECTION III.
DIRECT SUPPORT MAINTENANCE PROCEDURES
3.5 CONTROL PANEL ASSEMBLY REPAIR.
This task covers repair.
INITIAL SETUP
Tools
Acetylene Welding Equipment
Appendix B, Section III, Item 3
Material/Parts
Paint
Reference
TM 43-0139
TM 9-237
Equipment Conditions
Control Panel Cover Assembly removed,
paragraph 2.16.1 (609-A) or 2.16.2
(US636HCCD-1).
Control Panel removed, paragraph 2.16.36
(609-A) or 2.16.37 (US636HCCD-1).
Equipment Conditions
Control Panel Frame removed, paragraph
2.16.38 (609-A).
Control Enclosure Assembly, paragraph
2.16.39 (609-C).
Base Weldment, paragraph 2.16.40
(US636HCCD-1).
General Safety Instructions
T O prevent burns do not touch heated
metal components.
Do not work on equipment without
following standard shop safety
precautions.
This procedure applies to the following components:
Control Cover Assembly (609-A and US636HCCD-1)
Control Panel (609-A and US636HCCD-1)
Control Panel Frame (609-A)
Control Enclosure Assembly (609-C)
Base Weldment (US636HCCD-1)
a.
Weld component in accordance with and TM 9-237.
b.
Paint component in accordance with TM 43-0139.
3-8
