TM 10-4320-344-24
3.6.1 Pump Assembly Replacement. (Continued)
Figure 3-1.
Pump Assembly Replacement.
The pump assembly is not equipped with a lifting device. Three personnel
required when using chains or cables for lifting.
Position chains or cables
so that load will be balanced and pump assembly is not damaged.
c .
Connect a sling and suitable lifting device to pump assembly (5).
Raise
lifting device to support weight of pump assembly (5).
Do not stand or put arms, legs, or any other part of body under hoisted load.
Failure to obey this warning may result in serious personal injury or death.
d .
Carefully slide impeller shaft (10) away from engine flywheel (11), and lift
pump assembly (5).
3-10
