TM 10-4320-344-242.23.13 LightsMaintenance. (Continued)(1) Position clearance light (8) on trailer Chassis (15) and secure with twomounting screws (14), new lock washers (13), and nuts (12).(2) Refer to tags and connect wire (11) into wiring harness connector. Removeand discard tags.Do not apply excessive pressure to bulb when installing bulb.Failure toobey this warning may result in personal injury.(3) Install bulb (10) in socket and install lens (9) on clearance light (8).b .I n s t a l l s e r v i c e l i g h t ( 1 ) a s f o l l o w s:(1) Position service light (1) on trailer chassis (15) and secure with twomounting nuts (6) and new lock washers (7).(2) Refer to tags and connect two wires (5) to wiring harness connectors.Remove and discard tags.Do not apply excessive pressure to bulb when installing bulb.Failure toobey this warning may result in personal injury.(3) Install new bulb (4) in socket and install lens (3) on service light (1)securing with two lens mounting screws (2).2-410
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business