TM 10-4320-344-24
2.23.13.2 Testing.
Figure 2-182.
Lights Maintenance.
a.
Test wiring and socket of service light (1) and clearance light (8) for
c o n t i n u i t y .
If resistance is greater than 1 ohm, replace defective service
light (1) or clearance light (8).
b .
Test bulbs (4 and 10) for continuity between metal casing and bottom
terminals.
If resistance is greater than 1 ohm,
10).
replace defective bulb (4 or
2.23.13.3 Repair.
a .
Inspect all components and mounting hardware for damage.
b .
Replace all defective components.
2.23.13.4 Installation.
a.
Install clearance light (8) as follows:
2-409
